Home Forums Gamescan Chat42 About
* Login   * Register * FAQ    * Search
It is currently Thu 11-13-2025 5:57AM

View unanswered posts | View active topics


Board index » Forums » UMR

All times are UTC - 6 hours




Post new topic Reply to topic  Page 1 of 1
  [ 12 posts ] 
  Print view Previous topic | Next topic 
Author Message
UrLocalGuru
 Post subject: machine shop
PostPosted: Mon 08-21-2006 3:41PM 
Offline
General
User avatar

Joined: Mon 09-22-2003 3:29PM
Posts: 4317
Location: Find out on irc

Source: Off Campus
ok so I need some threaded holes redrilled into my little getto ass bike motor.. the old bolts sheared off.. and i couldnt get them out using any realistic methods.. even using a remover... so i tried drilling them out.. and wound up wiht a not so straight hole that isnt threaded... so im planning on but havent filled it with jb weld.. and then have someon drill me new holes and preferablly thread them for me as well..

is there any way someone in mech could do me such a favor as to drill 4 holes and thread them?

or does someone have a better idea

_________________
_______Notebook_________Gaming - Circa 2008ish
proc___T8300____________Q6600
clock-----------2.4GHz-----------
ram--------------4GB------------
vid__GF8600M GT 256MB__2xGF8800GTS 512MB sli
hdd____160GB_______3.5TBw/parity on a 3ware card

Top
 Profile E-mail  
    
dar9q7
 Post subject:
PostPosted: Mon 08-21-2006 4:37PM 
Offline
Colonel

Joined: Sat 04-29-2006 8:47PM
Posts: 663

Source: Sigma Nu
drill it out to the proper hole size then thread them with a tap
Top
 Profile  
    
jeff
 Post subject:
PostPosted: Mon 08-21-2006 4:38PM 
Offline
Colonel
User avatar

Joined: Mon 10-06-2003 3:07PM
Posts: 691

Source: Fidelity
beat super monkey ball again
Top
 Profile  
    
UrLocalGuru
 Post subject:
PostPosted: Mon 08-21-2006 5:46PM 
Offline
General
User avatar

Joined: Mon 09-22-2003 3:29PM
Posts: 4317
Location: Find out on irc

Source: Off Campus
well my biggest problem with drilling them out is i seem to have a problem with the concept of stright.... though i guess i could have anotehr go at it

oh and smb was a badass game... i thourghally(?sp) enjoyed it.. and id play it again in no time, specially now that i have my bigscreen set up again... only bigger and better

_________________
_______Notebook_________Gaming - Circa 2008ish
proc___T8300____________Q6600
clock-----------2.4GHz-----------
ram--------------4GB------------
vid__GF8600M GT 256MB__2xGF8800GTS 512MB sli
hdd____160GB_______3.5TBw/parity on a 3ware card

Top
 Profile E-mail  
    
jeff
 Post subject:
PostPosted: Mon 08-21-2006 6:04PM 
Offline
Colonel
User avatar

Joined: Mon 10-06-2003 3:07PM
Posts: 691

Source: Fidelity
UrLocalGuru wrote:
oh and smb was a badass game... i thourghally(?sp) enjoyed it.. and id play it again in no time, specially now that i have my bigscreen set up again... only bigger and better


ryan told me you own at that game
Top
 Profile  
    
snipermav
 Post subject:
PostPosted: Mon 08-21-2006 10:05PM 
Offline
Brigadier General
User avatar

Joined: Wed 09-10-2003 5:23PM
Posts: 1209
Location: 1604 Pine St.

Source: Fidelity
jeff wrote:
UrLocalGuru wrote:
oh and smb was a badass game... i thourghally(?sp) enjoyed it.. and id play it again in no time, specially now that i have my bigscreen set up again... only bigger and better


ryan told me you own at that game

LOL some of those levels were impossible..but then again you did play it for like a week straight
Top
 Profile  
    
heretic
 Post subject:
PostPosted: Mon 08-21-2006 10:37PM 
Offline
Spanish
User avatar

Joined: Wed 08-21-2002 10:10AM
Posts: 1898
Location: A-Frames bitches!

Source: Off Campus
UrLocalGuru wrote:
well my biggest problem with drilling them out is i seem to have a problem with the concept of stright.... though i guess i could have anotehr go at it

oh and smb was a badass game... i thourghally(?sp) enjoyed it.. and id play it again in no time, specially now that i have my bigscreen set up again... only bigger and better

good god are you drunk?!?!

_________________
KOK - 011, Pullin rank on bitches since 2005

Top
 Profile E-mail  
    
UrLocalGuru
 Post subject:
PostPosted: Tue 08-22-2006 11:20AM 
Offline
General
User avatar

Joined: Mon 09-22-2003 3:29PM
Posts: 4317
Location: Find out on irc

Source: Off Campus
drunk to which part? smb or drilling

_________________
_______Notebook_________Gaming - Circa 2008ish
proc___T8300____________Q6600
clock-----------2.4GHz-----------
ram--------------4GB------------
vid__GF8600M GT 256MB__2xGF8800GTS 512MB sli
hdd____160GB_______3.5TBw/parity on a 3ware card

Top
 Profile E-mail  
    
heretic
 Post subject:
PostPosted: Thu 08-24-2006 12:22PM 
Offline
Spanish
User avatar

Joined: Wed 08-21-2002 10:10AM
Posts: 1898
Location: A-Frames bitches!

Source: Off Campus
UrLocalGuru wrote:
drunk to which part? smb or drilling

Would it actually make a difference?

_________________
KOK - 011, Pullin rank on bitches since 2005

Top
 Profile E-mail  
    
UrLocalGuru
 Post subject:
PostPosted: Thu 08-24-2006 1:04PM 
Offline
General
User avatar

Joined: Mon 09-22-2003 3:29PM
Posts: 4317
Location: Find out on irc

Source: Off Campus
it might yes....


so what ive gathered is that no one wants to help me out then?

_________________
_______Notebook_________Gaming - Circa 2008ish
proc___T8300____________Q6600
clock-----------2.4GHz-----------
ram--------------4GB------------
vid__GF8600M GT 256MB__2xGF8800GTS 512MB sli
hdd____160GB_______3.5TBw/parity on a 3ware card

Top
 Profile E-mail  
    
Angel12b
 Post subject:
PostPosted: Fri 08-25-2006 9:34AM 
Offline
Major
User avatar

Joined: Sun 11-02-2003 9:52PM
Posts: 397

Source: Off Campus
if you go to the ME building and go to the lab... the guy who works there is normally really willing to help out as long as you are nice to him, what you want done is possible and he isn't already busy...

_________________
Sometimes the stupidity around you just overwhelms you.

Top
 Profile  
    
UrLocalGuru
 Post subject:
PostPosted: Fri 08-25-2006 9:36AM 
Offline
General
User avatar

Joined: Mon 09-22-2003 3:29PM
Posts: 4317
Location: Find out on irc

Source: Off Campus
thanks Angel

_________________
_______Notebook_________Gaming - Circa 2008ish
proc___T8300____________Q6600
clock-----------2.4GHz-----------
ram--------------4GB------------
vid__GF8600M GT 256MB__2xGF8800GTS 512MB sli
hdd____160GB_______3.5TBw/parity on a 3ware card

Top
 Profile E-mail  
    
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 12 posts ] 

Board index » Forums » UMR

All times are UTC - 6 hours


Who is online

Users browsing this forum: No registered users and 2 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group